What does floor-standing acoustics look like in the region of one hundred thousand rubles – three pairs from Arslab, DALI and ELAC
We have considered a whole range of “floor speakers” – from the most affordable systems [еще парочка других подборок] and to the acoustics approaching the level of one hundred thousand rubles. This time we are talking about similar models and touching on those that can cost a little more than this amount.
[95 220] ELAC Debut Reference DFR52 Is a model that continues the development of the brand’s line called Debut 2.0. For her, engineers have finalized both the “filling” and the design of the offices. The latter turned out to be quite compact and narrow [185 x 1015 x 241 мм, 16,7 кг], therefore, the speakers were not installed here the largest. Under the “hood” of the Debut Reference DFR52 there are two woofers and one 5.25-inch midrange radiator. All three woofers are equipped with aramid fibers and mounted on cast aluminum anti-resonance baskets. The 1-inch tweeter is covered by its own protective cage.
In addition to local protection, the acoustics are equipped with a common mesh on magnetic holders. It does not “kill” the appearance of the system – experts assess it as neutral and versatile in terms of possible combinations with various types of interiors. One of the design options is an oak finish of the cabinet with a white gloss front panel. The second – “under the walnut” with a black front side of the speakers. DFR52 cabinets are made of MDF and equipped with ties that increase the rigidity of the structure.
The maximum power input is 140 W.
The model stands out among its competitors by the number of bass reflex ports – there are three of them on each speaker. Two of them are made in a classic form and are brought out to the back of the cabinet, and the third is on the front side right at the base of the case.
In general, these speakers can easily make up an entire multi-channel set for a home theater, however, Stereo.ru experts still recommend limiting ourselves to a stereo system and share their impressions of just such a setup in their review…
[99 990] DALI Oberon 7 – one of the notable flagship models of the brand, which came to replace the Zensors. Its notable feature is SMC technology [Soft Magnetic Compound], which the engineers extended from the magnetic systems of more expensive acoustics and to the Oberon 7 hardware. It reduces the likelihood of any distortion by compensating for the effect of eddy currents on woofers. This system is equipped with two 7-inch midrange / woofer drivers with wood-pulp cones and a 29-mm “buzzer” operating in an extended frequency range. If we talk about the phase inverter, for this model, one was allocated for each of the speakers – on the back of the case.
The recommended amplifier power is 30-180 W.
how write at Stereo.ru, Oberon 7 “pulls one and a half of their price tag” and stand out with a high-quality embossed finish. It is available in four varieties: from “white” to “black ash”. Depending on the “style” – supplemented with protective nets made of sackcloth or black fabric.
MDF cabinets are light enough [14,8 кг]but not so compact [200 x 1015 x 340 мм]… The base for them is made in the form of a metal frame – spikes can be screwed into it, or legs with rubber bases can be put. The engineers ensure the rigidity of the body by means of struts and, of course, do not forget about damping.
[107 820] Arslab Classic 3.5 Is another system developed by Yuri Stanislavovich Fomin and his colleagues. It is based on premium speakers from Wavecor – there are two low-frequency components of 168 mm each with impregnated cellulose cones and a similar 168-mm midrange driver. There is also a Wavecor TW030WA12-01 tweeter of 30 mm made of thin impregnated fabric – its engineers placed it in a neat shallow horn. Quite “noticeable” port of the bass reflex – carried to the rear wall of the speaker case.
The recommended amplifier power is 25-150 W.
Like other systems from the brand, high-end components are involved – for example, Audiocore capacitors. Engineers also pay attention to damping and maintaining the level of rigidity of the cabinets. They are made of MDF, the inner sides are pasted over with sheets of bitumen, spacers and sound-absorbing material of Danish production are used. Available in four finishes: walnut veneer, black ash, white and black lacquer. Of course, the set of this acoustics also includes protective “grills” on special clamps.
In general, the speakers turned out to be massive [25 кг] and decent in size [200 x 1080 x 325 мм]… Their “foundation” is a massive spiked platform. According to SalonAV experts, the model is versatile and can be played both in a stereo system and in a multichannel home theater setup. Yet – pay attention for a unique ratio of quality and cost, which the manufacturer managed to achieve.
Additional materials on the topic:
Arslab, DALI and Monitor Audio – three pairs of “floor speakers” in the range of 60-80 thousand rubles
Affordable outdoor speakers – three pairs of audio systems in the base price segment
