How to order RAID data recovery online

Broken hard drive, accidentally deleted a report or project that you have been working on for a year, or a computer virus destroyed all the data? Now you need to recover the lost information, and this will require a lot of time and specialized knowledge. But there is a way to speed up the process, you can order the restoration via the Internet.

image

Self-service data recovery is not an easy process. You need to determine the reason, choose the right software for your configuration and problem, then try to read the deleted data and hope for a good result. All this takes a lot of precious time, and also does not exclude possible data loss in the process.

Already now you can order remote data recovery from specialists via the Internet. State-of-the-art technology and high-speed connections allow you to perform the most complex procedures over a long distance. This makes the process much easier, you just need to install several programs on your PC, contact a specialist and fully describe the problem.

Before ordering a service, you need to prepare your computer so that a specialist can access your PC. Without preliminary preparation, nothing will come of it.

How to eject discs

The first thing to do is to remove the disks from the device, then connect to a PC with the Windows operating system and the installed program Hetman RAID Recovery

If it’s a dedicated NAS device, simply pull out the drive tray.

image

If it’s a PC or server, open the side cover to find the drives.

image

Disconnect them from the power supply and the motherboard, unscrew a few bolts that secure it to the case and pull it out of the seat.

image

If the disks are connected to the controller, disconnect the cable, then connect to the SATA port of the motherboard.

image

image

For a RAID array assembled on Linux or MacOS operating systems, you can use a virtual machine, for a detailed video, see the link.

How to connect drives to a PC and what to do if there is not enough power or SATA ports

Before taking out the disks, you must count the number of drives that make up the array and check whether there are enough SATA ports on the PC motherboard to which they will be connected in the future and whether there is enough power and power outputs.

The SATA port looks like this.

image

And this is what the power connector looks like.

image

Their number is limited by the characteristics of the motherboard, as well as the power supply.

What to do if there are not enough SATA ports on the motherboard

In the event that there are more media than ports, you can temporarily disable the drive or other device that is not needed during the recovery process. If SATA is still not enough, you can use an expander.

image

There are a large number of models of such devices, their main difference is the number of additional ports. To connect the expander, install it in the PCIe slot of the PC motherboard.

Insufficient nutrition

In the case of missing power connectors, there are also various adapters and splitters. For example, here is a splitter that allows you to get 4 or 5 – SATA from one MOLEX connector. One carrier consumes a small amount of energy (in full load mode, no more than 20W, depending on the volume of the drive), so a conventional 400-500 Watt unit should be enough to power about 10 carriers.

image

If you have another PC, you can power some of the disks from it, this method is suitable, for example, if there are no additional splitters available, or if the power of the power supply of one computer is not enough. The media is connected to the motherboard of the first PC, and power is supplied to them from the second.

To proceed to the next step, you need to make sure everything is connected correctly. To do this, start the PC, check if it sees all the drives connected to it. Open Disk Management (right-click on the Start menu – Disk Management). When properly connected, all devices should be displayed in this window.

image

The next step is to set up computer management over the Internet.

How to install and configure TeamViewer

To establish a connection for remote recovery of lost data from RAID, you need to install the TeamViewer program. This utility will allow you to remotely control another computer via the Internet.

image

Open the official website, download the free version of the program. To install, run the file you just downloaded. Check the box Default setting and then Accept next.

Open the official website, download the free version of the program. To install, run the file you just downloaded. Check the box Default setting and then Accept next.

image

Wait for the end of the installation process, in the next window select how you want to use TeamViewer – for personal use, click Finish. This completes the installation process.

image

Find the program shortcut on the PC desktop, launch it. To allow control of your PC, you must provide an employee with your ID password.

image

After completing all these steps, your system will be ready for the process of remote recovery of lost information via the Internet. Write to this address and contact us by email.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *